How to set up estate levies and billing: a step-by-step guide

A practical, step-by-step guide for excos and facility managers setting up estate levies and billing, from defining levy items to issuing receipts and chasing balances.

By Zenus360 Team ·

To set up estate levies and billing, agree a written list of levy items with the exco, set a rate for each item per property type, choose a billing frequency for each, name one estate bank account for collections, decide whether residents may pay in part, and agree how cash and direct bank payments will be recorded and receipted. Get those six decisions approved before you load a single resident, and billing becomes routine instead of a monthly argument.

This guide walks an exco treasurer or facility manager through each step in order. It applies whether you bill from a spreadsheet or from estate management software, although the later steps are much easier with a system that generates bills and receipts for you.

Before you start: what you need on the table

  • The estate's bye-laws or constitution, and any resolutions from the last general meeting on dues and levies.
  • The approved annual budget. If you do not have one yet, start with our service charge budget template; your levy rates should come from the budget, not from last year's figure plus a guess.
  • A complete list of properties: house number, street, property type and who is responsible for paying (landlord or occupant).
  • The details of the estate's official bank account, including who the signatories are.
  • Opening balances: what each house owed or had in credit at the cut-over date, agreed with the outgoing records.

Step-by-step: setting up levies and billing

  1. List every levy item separately. Do not lump everything into one "estate dues" line. Typical items are security, waste collection, estate maintenance, street lighting or service charge, a diesel or generator levy where the estate runs a central generator, and one-off items such as a development levy for a road or a perimeter fence. Separate items let residents see exactly what they are paying for and let the treasurer report spending against each one.
  2. Classify your property types. Most estates distinguish between, for example, detached duplexes, semi-detached units, terraces, flats and bare plots, and sometimes commercial units. Keep the list short and objective. If a house could arguably fall into two types, write down the rule you used so the next exco applies it the same way.
  3. Set a rate for each item per property type. Work from the budget. Divide the cost of each item across property types in a way the general meeting has accepted, whether that is a flat rate per house, a weighting by size, or a mix. Record the basis in the minutes. A rate that cannot be explained is a rate that will be disputed.
  4. Choose the billing frequency for each item. Security and waste are usually monthly or quarterly; a development levy may be a single bill or a set of instalments; an annual service charge may be billed yearly with an option to pay in parts. Shorter frequencies give smaller bills and steadier cash flow; longer ones reduce administration.
  5. Nominate one settlement bank account. All levy money should go into an account in the estate's name, never a personal account, with at least two signatories. Publish the account details once, through an official channel, and tell residents that the estate will never ask them to pay into any other account.
  6. Decide your partial-payment policy. Allowing part payments helps residents who are paid irregularly and usually improves collections, because some money arrives instead of none. The trade-off is more balances to track. If you allow it, state how part payments are applied (for example, oldest bill first) so statements are predictable.
  7. Agree how offline payments are handled. Some residents will still pay cash to the estate office or transfer directly to the bank account. Decide who is allowed to accept and record these, what evidence is needed (a bank alert, a teller, a signed cash receipt book) and how quickly they must be recorded. Cash should be banked promptly and never held by one person overnight if you can avoid it.
  8. Load properties, residents and opening balances. Attach each resident to a house, mark who pays, and load what each house owed at the start. Check the total of opening balances against the outgoing treasurer's records before you go live.
  9. Issue the first bills and announce the change. Tell residents what is changing, when the first demand notice will arrive, how to pay and how they will get a receipt. Keep the announcement short and repeat it through more than one channel.
  10. Receipt every payment, every time. A receipt should show the house, the payer, the item paid for, the amount, the date and the remaining balance. Residents who get a proper receipt immediately stop asking "did you see my transfer?".
  11. Review collections monthly. Look at paid versus outstanding by item, and at debtor ageing: how much has been owed for 30, 60, 90 days and longer. Follow up the oldest balances first, in line with whatever sanctions your bye-laws permit.

A worked example (illustrative figures only)

Imagine an estate of 120 houses in Ajah with three property types. The figures below are invented to show the arithmetic; they are not a recommendation.

  • Security: ₦15,000 per month for a detached duplex, ₦12,000 for a semi-detached unit, ₦8,000 for a flat. Billed monthly.
  • Waste and sanitation: ₦3,000 per month for every house type. Billed monthly.
  • Estate maintenance: ₦60,000 per year for a detached duplex, ₦45,000 for a semi-detached unit, ₦30,000 for a flat. Billed annually, part payment allowed.
  • Road development levy: ₦250,000 per house, billed once and payable in four instalments.

A resident in a semi-detached unit who pays ₦20,000 against a ₦45,000 maintenance bill should receive a receipt for ₦20,000 and see a ₦25,000 balance on their statement straight away. If the same resident pays ₦15,000 in cash at the estate office, the facility manager records it against the right bill that day, and the statement updates for everyone who needs to see it.

Common mistakes to avoid

  • Changing rates mid-year without a resolution. Unless your bye-laws give the exco that power, take rate changes to residents first and minute the decision.
  • Billing the wrong party. Who pays (landlord or tenant) is a matter for the lease and the estate's rules. Record it per house rather than assuming.
  • Accepting payments into personal accounts. It invites fraud and makes reconciliation almost impossible.
  • Not reconciling. Match every bank credit to a bill. Unmatched credits are where disputes and losses hide. See payment reconciliation.
  • Waiting too long to chase arrears. A balance that is three months old is much easier to collect than one that is a year old. Our article on reducing estate levy defaulters covers follow-up in more detail.

Launch checklist

  1. Levy items, rates per property type and frequencies approved and minuted.
  2. Settlement bank account confirmed, with at least two signatories.
  3. Partial-payment and offline-payment rules written down.
  4. All properties and residents loaded, with the payer marked for each house.
  5. Opening balances loaded and totals agreed with the previous records.
  6. Resident announcement sent through at least two channels.
  7. A named person responsible for recording offline payments and a daily or weekly routine for doing it.
  8. A date in the diary for the first monthly collections review.

How Zenus360 helps

Zenus360 lets the estate set up levy items, rates per property type, billing frequency and the settlement bank account, then generates recurring demand notices automatically on schedule. Residents view and pay their bills in the app by card or bank transfer through a payment link, or from their Zenus360 wallet, and each estate can choose whether to allow partial payment. Payments are processed through Paystack, Flutterwave or Monnify, configured per estate.

Every payment produces an instant receipt (a PDF invoice or receipt, by email and in the app), and residents can see their account statement. Facility managers record offline cash and bank payments against a bill, and excos see paid versus outstanding, debtor ageing, collections reports and resident balances. Residents and opening balances can be bulk imported, and the double-entry accounting back office handles bank statement import and reconciliation.

See how it works on the estate dues collection page, or book a free demo and we will walk your treasurer through a setup using your own levy list.

Frequently asked questions

Should estate levy rates be the same for every house?

Not necessarily. Many estates set different rates per property type so that larger houses contribute more, but the basis should be agreed by residents and recorded in the minutes or bye-laws.

Is it a good idea to allow partial payment of estate dues?

Often yes, because it brings in money that might otherwise not be paid at all. The cost is more balances to track, so state clearly how part payments are applied and make sure statements show the remaining balance.

How should an estate handle cash payments?

Limit who can accept cash, issue a receipt immediately, record the payment against the right bill the same day and bank the cash promptly. Never let cash sit with one person for long.

Who pays estate dues, the landlord or the tenant?

It depends on the lease and the estate's bye-laws. Record the responsible payer for each house and, if there is a dispute, ask the estate's legal adviser.

Run your estate on Zenus360

Gate passes and visitor management, levy and service charge collection, a resident wallet, prepaid electricity tokens, polls and support tickets in one estate app, with a dashboard and full accounts for your exco.